UUS

Etiketiprinter Godex ZX420I

Saadavus:

RTT Laos

Asub RTT Laos - Kadaka tee 36 või tutvu esinduses 2. korrusel.

Toote saab kätte E-N 9-17:00 ja R 9-16:00

Kaup kätte: 24.12.2024
Tootekood: ZX420I
Toote PDF: Lae alla siit
Tasu kolme võrdse maksena 3 x 299,67 

Original price was: 986,74 €.Current price is: 899,00 €. 736.89€

km.-ta km.-ga

3 laos

Parim kombinatsioon kompaktsusest ja vastupidavast disainist.
Tuginedes klientide tagasisidele on GoDEXi kõige kuluefektiivsemad ja ruumisäästlikumad printerid 
GoDEX ZX400 / ZX400i, integreerides tööstuse võimekuse ja suurepärase disaini. 

Väga hea alternatiiv Zebra ZT230 masinale! 

Saab kasutada Bartenderit,Zebra Designerit, kui ka Godexi enda GOLabel tarkvara.

UUS GOLABEL II tarkvara on saadaval !

Ära unusta kasutamast GoAppi, mis on Godexi printeri omanikule täiesti tasuta!

GoDEX ZX420i Specifications

Print MethodThermal Transfer / Direct Thermal
Resolution203 dpi (8 dots/mm)
Print Speed6 ips (152 mm/s)
Print Width4.25” (108mm)
Print LengthMin. 0.16” (4 mm)** ; Max . 157.44” ( 3999mm)
Processor32-bit RISC CPU
MemoryFlash 128 MB Flash (60 MB for user storage)
SDRAM 32 MB
Sensor TypeAdjustable reflective sensor and transmissive sensor, left aligned
MediaType Continuous form, gap labels, black mark sensing, and punched hole; label length set by auto sensing or programming
Width
Tear : Min. 1” (25.4 mm) – Max. 4.64” (118 mm)
Cutter : Max. 4.61” (117 mm)
Dispenser / Rewind : Max. 4.64” (118 mm)
Thickness Min. 0.003” (0.076 mm) – Max. 0.01” (0.25 mm)
Label roll diameter
Max. 8” (203.2 mm) with 3″ (76.2 mm) core
Max. 6” (152.4 mm) with 1.5″ (38.1 mm) core
Max. 5″ (127 mm) with 1″ (25.4 mm) core
Core diameter Min. 1 ” (25.4 mm) – Max. 3″ (76.2 mm)
RibbonTypes Wax, wax/resin, resin
Length Max. 1476’ (450 m)
Width Min. 1.18” (30 mm) – Max. 4.33” (110 mm)
Ribbon roll
diameter 3” (76.2 mm)
Core diameter 1” (25.4 mm)
Printer LanguageEZPL, GEPL, GZPL auto switch
Interfaces• USB 2.0 (B-Type)
• Serial port: RS-232 (DB-9)
• IEEE 802.3 10/100 Base-Tx Ethernet port (RJ-45)
• USB Host (A-Type)
OptionsCutter (Dealer Install)
Parallel port adaptor module (Centronic female 36-pin)(Dealer Install)
Bluetooth (Dealer Installer)
Wireless LAN (IEEE 802.11 b/g/n) (Dealer Install)
External label rewinder
Label Dispenser (Dealer Install)